قفل باب ذكي بلوحة مفاتيح مع استشعار البطاقات
قفل باب بلوحة مفاتيح

قفل باب ذكي بلوحة مفاتيح مع استشعار البطاقات

يجمع قفل باب ذكي بلوحة مفاتيح RFID طراز SLK-1103 بين الوصول عبر التطبيق والبطاقة والرمز السري والمفتاح، مع هيكل مصنوع من سبائك الزنك المصبوب، ومزلاج وقفل مُدمج، ومنفذ USB للطاقة في حالات الطوارئ. اطلب عرض سعر لمشروعك.

SLK-1103 provides four access methods with USB emergency power

SLK-1103 is an RFID keypad smart door lock for importers, distributors, and project contractors deploying card, passcode, mobile-app, and mechanical-key access. It uses a Tuya Bluetooth platform, a die-cast zinc alloy housing, and a deadbolt mortise for indoor access-control installations.

  • Tuya Bluetooth management supports remote unlocking, temporary or periodic passcodes, user administration, and access records, allowing authorized staff to control and review access through the app.
  • RFID or IC card, keypad passcode, Bluetooth app, and mechanical override key provide four entry routes, allowing the lock to serve shared rooms, offices, and other controlled doors.
  • Four AA batteries form the primary power supply, while the external USB terminal provides emergency power, reducing the risk of depleted batteries leaving staff without electronic access.
Model
SLK-1103
Access methods
Passcode, RFID/IC card, Tuya Bluetooth app, and mechanical key
Connectivity
Bluetooth through Tuya
Lock body
Deadbolt mortise
Housing material
High-purity die-cast zinc alloy
Power
4 × AA batteries with external USB emergency power

What makes the SLK-1103 a keypad code smart lock

SLK-1103 Four access routes support controlled fallback procedures

01Four access routes support controlled fallback procedures

SLK-1103 accepts RFID or IC cards, passcodes, mobile-app access, and a mechanical override key. These routes allow project operators to define normal electronic access while retaining a physical contingency for battery depletion or credential-management issues.

02Bluetooth management reduces application-side wiring

Tuya Bluetooth provides remote unlocking, temporary or periodic passcodes, user management, and access records without a stated wired network architecture. This configuration suits access points where the buyer wants app-based administration without installing network cabling to each door.

SLK-1103 Bluetooth management reduces application-side wiring
SLK-1103 Die-cast zinc alloy body targets repeated daily operation

03Die-cast zinc alloy body targets repeated daily operation

The housing is made from high-purity die-cast zinc alloy, providing the installed lock with a defined metal body material for handling and installation planning. Its black finish provides one specified color option for project and distributor orders.

04USB emergency power addresses battery depletion risk

The lock normally runs on four AA batteries and includes an external USB terminal for emergency power. This gives maintenance teams a secondary power route when batteries are depleted, while the mechanical key remains available as a physical override.

SLK-1103 USB emergency power addresses battery depletion risk

Where the SLK-1103 is installed

The SLK-1103 electronic keypad deadbolt is installed on guesthouse, short-stay, and small-office doors, with Tuya Bluetooth management and a deadbolt mortise.

SLK-1103 - Guesthouses & B&Bs
Guesthouses & B&Bs
For guesthouses and B&Bs, the SLK-1103 uses temporary or periodic passcodes, user management, and access records through the Tuya Bluetooth platform.
SLK-1103 - Short-stay rooms
Short-stay rooms
For short-stay rooms, the SLK-1103 supports changing passcodes and remote unlock through the Tuya Bluetooth platform, avoiding physical-key handover.
SLK-1103 - Small office doors
Small office doors
لأبواب المكاتب الصغيرة، يجمع SLK-1103 بين التحكم في الوصول القياسي عبر لوحة مفاتيح وبطاقات RFID ومفتاحoverride ميكانيكي، مع إمكانية تجاوز انقطاع الطاقة عبر منفذ USB وباستخدام مصدر طاقة خارجي.

كيف يعمل SLK-1103

يتيح SLK-1103 الوصول عبر بيانات الاعتماد التي تم إعدادها في تطبيق Tuya Bluetooth، أو بطاقة RFID أو IC، أو رمز لوحة المفاتيح، أو المفتاح الميكانيكي، وذلك وفقًا لتركيب الجهاز وإعداد المستخدم.

  1. تحضير الباب. تحقق من مادة الباب وسماكته ويده ومزلاج القفل المُدمج والمسافة الخلفية مقابل متطلبات المشروع قبل الطلب. تتوفر الرسومات الأبعاد ووثائق التركيب لمراجعة الملاءمة.
  2. تركيب لوحة المفاتيح وهيكل المزلاج. ركّب مجموعة لوحة المفاتيح المصبوبة من سبيكة الزنك وقفل المزلاج المُدمج المحدد وفقًا لدليل التركيب المرفق. لا تتطلب بنية Bluetooth اتصالًا سلكيًا بالشبكة عند القفل.
  3. إعداد المستخدمين وبيانات الاعتماد. استخدم تطبيق Tuya Bluetooth لإدارة المستخدمين وإصدار بطاقات RFID أو IC ورموز المرور وبيانات اعتماد مؤقتة أو دورية. ثم تتاح سجلات الوصول عبر وظائف الإدارة المحددة.
  4. توفير خيارات الوصول المادية. قدّم لكل مستخدم مخوّل البطاقة أو رمز المرور أو وسيلة الوصول عبر التطبيق المناسبة. يظل مفتاح التجاوز الميكانيكي جزءًا من إعداد وصول القفل للاستخدام في حالات الطوارئ.
  5. التخطيط لصيانة الطاقة. ركّب أربع بطاريات AA للتشغيل الطبيعي واحتفظ بمسار الطوارئ عبر USB متاحًا عند نفاد البطاريات. استبدل البطاريات وفقًا لحالة التشغيل التي تم تحديدها أثناء التكليف التشغيلي.

النظام والتوافق

SLK-1103 هو مزلاج إلكتروني ذكي بلوحة مفاتيح يعتمد على Bluetooth، ومُعد للوصول عبر البطاقة ورمز المرور والتطبيق والمفتاح، ولا يتضمن بصمة الإصبع أو التعرف على الوجه أو التعرّف على عروق الأصابع أو جهاز التحكم عن بُعد.

المنصة الذكيةTuya
الاتصالBluetooth
إدارة التطبيقفتح القفل عن بُعد، ورموز مرور مؤقتة أو دورية، وإدارة المستخدمين وسجلات الوصول
بطاقة RFID/ICمدعوم
رمز لوحة المفاتيحمدعوم
تطبيق الهاتف المحمولمدعوم
مفتاح التجاوز الميكانيكيمدعوم
بصمة الإصبع—
التعرف على الوجه بتقنية 3D—
التعرف على عروق الأصابع—
التحكم عن بُعد أو الجهاز المفتوح—
الطاقة الأساسية4 بطاريات AA
طاقة الطوارئتجاوز انقطاع الطاقة عبر مصدر خارجي من خلال منفذ USB
القفل المُدمجمزلاج
اللمسة النهائيةأسود
نطاق OEM وODMشعار ولمسة نهائية وتغليف وكتيبات وتهيئة منتج مخصصة لطلبات الموزعين والمشاريع

افتح تبويب المواصفات للحصول على البيانات الفنية الكاملة لـ SLK-1103، واطلب الرسومات الأبعاد ودليل التركيب وورقة البيانات الكاملة لمراجعة المشروع.

قارن مع الطرازات ذات الصلة

مقارنة بندًا ببند مع طرازات SLK الأخرى في عائلة المنتجات نفسها، لتتمكن من اختيار أقرب خيار مناسب للباب والمشروع المتاحين.

المواصفاتهذا الطرازSLK-1102SLK-3108
طرق الوصولرمز المرور، بطاقة RFID/IC، تطبيق الهاتف المحمول، المفتاح الميكانيكيبصمة الإصبع، تطبيق الهاتف المحمول، المفتاح الميكانيكيرمز المرور، المفتاح الميكانيكي
المنصة الذكيةTuya (Bluetooth)Tuya (Bluetooth)—
الاتصالBluetoothBluetooth—
هيكل القفل / القفل المُدمجمزلاجمزلاج، قابل للتعديل من 60–70 mmمزلاج من الزنك، قابل للتعديل من 60–70 mm
مادة الهيكلسبيكة زنك عالية النقاء (مصبوبة)سبيكة ألمنيوملوحة من سبيكة الزنك؛ لوحة خلفية من ABS؛ لوحة مفاتيح سيليكونية
خيارات اللمسة النهائيةأسودأسود / فضيأسود / فضي

الأرقام مأخوذة من ورقة المواصفات الخاصة بكل طراز. تحقق من تحضير الباب وبيانات الاعتماد وخيارات المشروع قبل الموافقة.

موارد ذات صلة لمشروعك

اضبط SLK-1103 وفق متطلبات مشروعك
أرسل أبعاد الأبواب والكميات والتشطيبات — وسنُعيد لك تكوينًا ملائمًا وتفريغ التعبئة وعرض سعر للمشروع.
اطلب عرض سعر
اطلب الكتالوج
طرق الوصول
الوصول بالبصمة—
الدخول عبر رمز المرور / لوحة المفاتيحقياسي
الوصول عبر RFID / بطاقة ICقياسي
التعرف على الوجه بتقنية 3D—
التعرف على الوريد الإصبعي—
الوصول عبر تطبيق الهاتف المحمولقياسي
مفتاح التجاوز الميكانيكيقياسي
مفتاح تحكم عن بُعد / جهاز مصغّر—
المنصة الذكية والاتصال
المنصة الذكية / الإدارة Tuya (Bluetooth)
الاتصال Bluetooth
وظائف الإدارة Remote unlock, temporary/periodic passcodes, user management, access records
ميكانيكي
نمط المنتج Electronic Keypad Deadbolt Lock
مادة اللوحة / الجسم High-purity zinc alloy (die-cast)
خيارات الإنهاء / الألوان Black
جسم القفل / القفل المُدمج Deadbolt
الطاقة والسعة
مصدر الطاقة 4 × AA batteries
مVoid External power override via USB terminal
الخدمات التوثيقية وخدمات التصنيع|Original
الوثائق Dimension drawings, installation guide and full datasheet available on request
خدمات التصنيع الأصلية / تطوير المنتجات Custom logo, finish, packaging, manuals and product configuration for distributor and project orders

The SLK-1103 differs from the SLK-3108 on access methods: it is built around passcode, RFID/IC card, mobile app, mechanical key rather than passcode, mechanical key. The two models share one family but diverge on access methods; pick the SLK-1103 for passcode, rfid/ic card, mobile app, mechanical key, or specify the SLK-3108 rather than the SLK-1103 for passcode, mechanical key.

The SLK-1103 is specified for a deadbolt lock body. Those figures describe the factory configuration, not a guarantee on a measured opening. Door thickness, swing direction, backset and the current lock-body size are confirmed from the measured door rather than assumed, then matched before quotation.

The SLK-1103 uses Tuya (Bluetooth); stated management functions include remote unlock, temporary/periodic passcodes, user management, access records. Access is administered directly in this platform, with no separate property-management server on site, so it suits homes, rental units and small managed properties. Bluetooth pairing alone covers local operation, while any remote function is subject to whether the property needs a gateway for its connectivity.

The SLK-1103 is supplied with passcode, RFID/IC card, mobile app and mechanical key access. Every listed method is taken from the model’s own specification sheet rather than assumed for the family. Match this credential set to the openings on the project — shared entrances and individual rooms may need different methods — and size the order accordingly.

The SLK-1103 runs on 4 × AA batteries; entry remains possible through the mechanical override key and external power override via USB terminal. Battery type, expected service interval and the emergency connector are listed in the datasheet and reviewed with the installer during commissioning.

Administrators can deactivate the missing phone, card or code and restore access by enrolling a replacement passcode and mobile credential, or issuing and enrolling a replacement RFID/IC card or using the mechanical override key. Because credentials are managed individually, losing one does not require re-keying the door. The buyer should confirm who holds administrator rights and the spare-credential process before handover.

The factory supports custom logo, finish, packaging, manuals and product configuration for distributor and project orders for the SLK-1103. The catalogued finish range is black, with high-purity zinc alloy (die-cast) construction. Timing for artwork submission and sample approval is planned ahead of production so branding never delays the confirmed shipment date.

The dimension drawings, installation guide and full datasheet are available on request. Certification for the destination market, warranty length and spare-parts scope are model-specific and confirmed per project; OEM terms (custom logo, finish, packaging, manuals and product configuration for distributor and project orders) can be included. Spare-parts scope and support period are settled alongside the document package so after-sales responsibilities are clear at handover.

قد يعجبك أيضًا

أضِفه إلى عربة التسوق

عربة التسوق الخاصة بك
سيتم تحسين تجربتك على هذا الموقع من خلال السماح بملفات تعريف الارتباط سياسة ملفات تعريف الارتباط
Chat on WhatsApp