A practical ik rating definition for B2B buyers, covering how to read IK codes, request evidence, and assess smart lock impact protection.

نُشر في: مارس 10, 2026

Smart Lock Glossary: IK Rating Definition for B2B Buyers

Smart Lock Glossary: IK Rating Definition for B2B Buyers

Smart-lock quotations and submittals often use impact protection terminology without saying what was tested, which housing was in the sample, or how the result applies to the installed product. This ik rating definition runbook gives importers a controlled way to receive an IK claim, request the underlying record, match it to the quoted SKU, and record a release, hold, or escalation decision. It is a procurement workflow, not a substitute for the applicable standard, a laboratory report, or project-specific engineering judgment.

Direct answer. In brief, this article covers ik rating definition from ik rating definition to ik-rating. It states what to confirm about ik rating definition on the dated product page where a figure is involved. An ik rating definition is a category reference. ik rating definition comes first. Each option states what ik rating definition commits a buyer to.

On ik rating definition, this article uses ik rating definition as the definition. It treats ik rating definition as a working definition specific to this market and product, rather than a general one.

flowchart TD
    A[Step 1 Capture the claim] --> B[Step 2 Decode the IK code]
    B --> C[Step 3 Request traceable evidence]
    C --> D[Step 4 Match report to quoted SKU]
    D --> E[Step 5 Apply the decision comparison]
    E --> F[Step 6 Record outcome and next owner]
    F --> G{Decision outcome}
    G -->|Release| H[Project specifier]
    G -->|Hold| I[Supplier or importer]
    G -->|Escalate| J[Engineering or relevant authority]

Runbook boundary for an import review

An IK impact rating is the impact-protection classification assigned to a tested enclosure under IEC 62262. It is written as IK followed by two digits and may appear beside an ingress protection code in the same product marking. For procurement, the useful ik rating definition is narrow: it identifies the impact class represented by the evidence, not the burglary resistance of an entire smart-lock installation. The second take on ik rating definition is Smart Lock Glossary: Credential Coercivity Definition for B2B Buyers. Specifications at this level come off the smart door locks.

Run this procedure when a quotation, datasheet, carton, sample approval, or submittal states an IK code. If no code appears, do not infer one from rugged styling, component material, or a family-level claim. For this programme, the steps below are the buyer’s own working definition; the formal classification remains a question for the dated test evidence and a qualified reviewer.

Required inputRecord before reviewHold if absent
Quotation or specificationExact SKU, claim and document revisionClaim is not tied to a product
Supporting evidenceControlled report or extract and tested itemOnly a marketing line is supplied
Installation contextDoor, enclosure, accessory and intended environmentTested scope cannot be compared
Project requirementRequired code, standard reference and accepting partyRequirement source is unclear

Step 1 — Capture the claim without interpreting it

Enter the claim in a controlled record. Capture the letters and digits exactly, including any suffix or wording such as “IK10 enclosure.” Record where it appeared, the document revision, and the exact quoted SKU. Preserve the supplier’s source text beside the normalized field so a later reviewer can distinguish what the supplier stated from the buyer’s interpretation.

Record fieldRequired entryExample of a defect
ClaimIK plus two digits“High impact”
SourcePage or document and revisionUncontrolled sales email only
ProductExact quoted SKULock family name
ScopeComponent or assembly namedEntire installation implied

Do not accept a decimal, roman numeral, unprefixed number, or image without legible context as a normalized code. Correct the claim through a written revision; do not silently convert a family claim into a model-specific one.

Step 2 — Decode the IK impact rating

The code identifies a place on the IEC 62262 impact-energy scale. Higher digits represent a higher test-energy class in that scheme. They do not mean every part of the lock resisted the same impact, or that the installed door will resist forced entry.

IK codeNominal impact energy represented
IK00No protection
IK010.2 J
IK020.5 J
IK031 J
IK042 J
IK055 J
IK0610 J
IK0720 J
IK0830 J
IK0950 J
IK10100 J

Use this table to navigate a supplier’s statement, not as the acceptance record. Confirm the exact designation against the report, tested specimen, standard edition, and any stated limitation. For this programme, the impact protection rating is meaningful only when the code and its scope remain together in the evidence file.

Step 3 — Request traceable test evidence

Ask for a dated product-page extract or laboratory record identifying the standard and edition, the exact product or component tested, the result code, the test configuration, the laboratory, and any exclusions. If a report is redacted, request enough information to connect it to the SKU. A photograph of a mark, brochure phrase, or generic factory statement does not establish the scope.

The request should establish:

  • Whether the result covers the complete lock, reader, keypad, escutcheon, or another enclosure.
  • Which mechanical revisions and accessories were present during testing.
  • Whether the record states conditions, orientations, or accessory restrictions.
  • Whether the result applies only to the listed specimen or to a defined product family.

The broader distinction between a declaration, test record, and other supporting documents is covered in What Conformity Paperwork Means: Terms and Tables.

Step 4 — Match the report to the quoted SKU

Treat the match as a configuration check, not a name check. Compare the report’s model designation, revision, enclosure, reader arrangement, and included accessories with the current quotation. If the project uses a retrofit enclosure, field survey information must identify the actual door and preparation; see Office Smart Lock Site Survey and Smart Lock Retrofit Site Survey. If preparation affects the assembly decision, use How a Door Is Prepared for a Lock: Terms and Tables.

Also confirm on the dated product page for the specific SKU whether an IK designation is stated and how it is scoped. If it is absent, or the evidence covers a different item, keep the claim in the pending column. For supplier due diligence, use How a Supplier Is Actually Verified: Terms and Tables as a separate control.

Hardware such as a reader cover or keypad may be evaluated separately from the lock body. Never extend one component’s result to the whole installed product unless the evidence explicitly covers that assembly and the reviewer accepts the scope.

Step 5 — Apply the decision comparison

The rating does not answer several adjacent questions by itself. Use the following comparison to see what the code settles, what evidence is still needed, and how the result may enter the import approval file.

Decision questionWhat the IK code can supportEvidence still requiredRoute
Is an impact class documented?A named class in the cited scopeDated record and tested itemTechnical reviewer
Does it cover the product?Only what the evidence includesModel and revision matchSupplier
Does it cover the installation?No automatic extensionDoor survey and configuration recordEngineering review
Is water or dust protection established?No answer from IK aloneSeparate ingress-protection evidenceTest laboratory
Is burglary resistance established?No answer from IK aloneSeparate security evidenceProject specifier

This decision comparison prevents an otherwise valid IK code from being used as evidence for a different technical requirement.

Step 6 — Record the outcome and next owner

Write one of three outcomes against the claim: release for project review, hold for missing evidence, or escalate for a scope or requirement conflict. “Released” means the evidence is fit to enter the approval file; it does not by itself approve installation.

OutcomeTriggerRequired recordNext owner
Release for reviewCode, scope and SKU alignEvidence index and reviewer noteProject specifier
HoldEvidence is missing or mismatchedOpen question and responsible ownerSupplier or importer
EscalateRequirement or scope conflictsBoth records and the decision questionEngineering or relevant authority

Include the source, document revision, date received, exact SKU, code, tested item, reviewer, and next action. Preserve rejected versions; they explain why a decision changed without overwriting the earlier claim.

Exceptions that force a hold

Use these rules even when the commercial schedule is otherwise ready:

  • Code without evidence: Hold the claim until a controlled record identifies the tested item and result.
  • Family claim only: Request model-specific evidence rather than extending the family statement.
  • Conflicting records: Hold both records for review instead of selecting the more favourable one.
  • Changed specimen: Recheck the revision, enclosure, reader arrangement and accessories against the approved configuration.
  • Security requirement disguised as IK: Escalate when an IK designation is being used to imply forced-entry resistance.
  • Site impact test requested: Keep destructive impact testing outside routine installation acceptance unless a qualified process explicitly requires it.

Where the term enters the transaction

An importer usually encounters IK first in an RFQ response or sample approval. At RFQ stage, ask for the code in the technical response and define what evidence will follow; What an RFQ Should Contain: Terms and Tables provides the wider quotation structure.

At sample stage, bind the approved code, document revision, and tested scope to the sample record. At production release, compare the supplied configuration with the approved one. At installation, record the installed SKU and door context without turning the routine installation check into an impact test. A product change that alters the enclosure or tested assembly should reopen the evidence check.

Questions to paste into the RFQ

  1. What exact model and revision does the stated IK code cover?
  2. Which IEC 62262 edition and test method were used?
  3. Is a dated test report, controlled extract, or product-page record available?
  4. Does the result apply to the complete lock, one enclosure, or an identified component?
  5. Which accessories, finishes, reader arrangements, and mechanical revisions were present?
  6. What limitations or exclusions are stated with the result?
  7. Does the dated product page for this specific SKU carry the same designation and scope?
  8. How will the supplier notify the buyer if the tested configuration changes?

These questions turn an isolated code into a traceable procurement record.

Standards and project boundary

An IK designation is technical evidence, not an all-purpose security grade. It does not establish burglary resistance, ingress protection, fire performance, electromagnetic compatibility, or the strength of the door, strike, frame, hinges, or closing hardware. An ingress protection code belongs to a separate water-and-dust classification; do not combine the two letter systems or infer one from the other.

The build-up behind that decision is in smart lock three point latch. That is the same question ik rating definition has to answer here.This is a technical procurement guide, not legal advice or a declaration of compliance.

CONFIRM-WITH-LOCAL-TEST-LAB — Confirm the applicable standard edition, test scope, and destination-market requirement for the specific product and installation.

CONFIRM-WITH-LOCAL-ENGINEERING-REVIEW — Confirm whether the door assembly and project risk assessment require evidence beyond the tested enclosure scope.

These controls prevent a technical code from becoming an unsupported legal or installation assumption.

Evidence dossier fields to retain

Keep the product evidence dossier traceable from the first quotation to the installed record. A complete file allows another reviewer to reproduce the decision without relying on someone’s memory.

RecordMinimum contentPurpose
Claim captureOriginal wording, source, revision and SKUShows what was actually claimed
Test evidenceStandard, specimen, result, scope and exclusionsEstablishes the tested basis
Configuration matchDifferences between tested and quoted itemsPrevents scope extension
Decision recordOutcome, reviewer, conditions and next actionSupports audit and change control

Commercial handoff for an import programme

Before asking a supplier to close the file, send the exact SKU, destination market, door type, accessory list, current quotation revision, and required IK code. Request the dated product-page evidence, tested configuration, and any stated exclusions. A complete response lets the importer classify the claim without turning a general IK statement into an unsupported product guarantee.

Request a quote with those inputs so the technical response can be evaluated against the same evidence fields used during review.

عربة التسوق الخاصة بك
سيتم تحسين تجربتك على هذا الموقع من خلال السماح بملفات تعريف الارتباط سياسة ملفات تعريف الارتباط
Chat on WhatsApp